Categories
BLOG

openvape variable voltage directions

How to Use the Veedverks Variable Voltage Vape Pen Battery

December 09, 2016

The Veedverks Variable Voltage (VV) Battery has a full array of functions, despite being simple in its design. You interact with the device and change its settings using its one input: the Touch Sensor. It is located on the end with the circular LED light and the Veedverks “V” logo. By touching a finger to the tip of the battery one to five times, you can perform a variety of functions. The number of taps and the colors indicated by the LED light can seem like a lot to remember at first, but after using the battery a couple times, you’ll find it’s a snap. This guide well help you become acquainted with your new VV Battery.

Both the Veedverks Starter Kit and the VV Battery standalone package include the following instructions/reference for battery operation:

Let’s take a closer look at each section.

Off/Ready

By touching the Touch Sensor five times, you can toggle between OFF mode and READY mode. When changing from OFF to READY, the LED light will flash on. The color of the light will either be teal, blue, or purple, indicating the current voltage setting (explained under the Change Voltage section below). When changing from READY to OFF, the LED light will not flash.

The two modes are explained below:

  • OFF means the unit is completely shut down, and nothing is receiving battery power. When the VV Battery is not being used, it should be kept in OFF mode.
  • READY mode is really not much different than OFF mode, with one exception: The internal air pressure sensor is powered, ready, and waiting to detect when you draw (inhale) on the mouthpiece. Although the drain on the battery is negligible in READY mode, it should be switched to OFF to prevent accidentally activating the heating system.

Preheat

Four taps on the Touch Sensor will send the device to PREHEAT mode. You can tell you are in preheat mode when you see the LED light cycling through all the colors of the rainbow. Veedverks brand oil does not require preheating, so this function is for when the VV Battery is used to heat thicker substances.

PREHEAT mode times out in 30 seconds. If you accidentally enter PREHEAT mode, you can exit by simply tapping once on the Touch Sensor or by drawing on the mouthpiece.

Change Voltage

Three taps on the Touch Sensor will cycle the unit through the three voltage settings. The voltage settings are indicated by the teal, blue, and purple colors. The voltage levels are explained below:

  • Teal indicates the lowest voltage, 2.4 volts. This will create a smaller vapor hit, but it delivers more flavor.
  • Blue indicates medium voltage, or 3.2 volts. It provides a balanced hit to the user.
  • Purple indicates the highest voltage level, 4.0 volts. It creates the most vapor, providing the user with the biggest hit.

At the highest voltage setting, three taps on the Touch Sensor will cycle the unit back to the lowest setting.

As noted in the Off/Ready section above, w hen changing from OFF mode to READY mode by tapping 5 times, the LED l ight will flash on. The color it flashes will either be teal, blue, or purple, indicating the current voltage setting.

Two Taps

Two taps on the Touch Sensor do nothing. Two shalt thou not tap, excepting that thou then proceed to three.

Check Charge Level

By touching the Touch Sensor one time (or simply holding your finger on it), you can tell if the VV Battery is in OFF mode or READY mode. If the LED light does nothing, the unit is OFF. If it lights up, the unit is in READY mode.

The color of the light indicates the charge level of the battery. Green indicates that the battery is fully charged. As the battery is depleted, the color changes from green to yellow, orange, and then red. The ideal time to recharge the unit is when it first turns from orange to red.

This chart indicates approximate numbers of draws that are remaining at a given battery charge and voltage setting. A higher voltage setting will obviously deplete the battery more quickly.

Veedverks' innovative variable voltage CBD vape pen battery is the most versatile on the market, allowing you to change voltages and preheat thick oil

Openvape variable voltage directions

You can purchase any O.penVAPE vaporizer battery on our website or from one of our licensed retailers. If you would like to purchase a cartridge for your O.penVAPE battery, please see our list of licensed retailers for a convenient location in one of 10 states where O.penVAPE is sold.

HOW TO USE

All of our O.penVAPE batteries come partially charged so they’re ready to use right out of the box. Our O.penVAPE batteries are also draw activated, making getting started easy. Simply screw on your favorite cartridge and inhale.

If you have our 2.0 Variable Voltage Battery there are a few extra bells and whistles. If it doesn’t work upon inhale, simply click the stylus tip 5x to turn on the battery and it will illuminate. You can also change heat settings by clicking 2x.

Our Original and ISH vaporizer pens are a simple as can be! Once charged, just attach your favorite cartridge and inhale for up to 8 seconds to get your perfect puff.

If your pen needs charging, just plug it in to your USB charger that comes with your vaporizer. Once the indicator light on the O.penVAPE charger turns green, the tip of the pen will stop pulsing to let you know the pen is fully charged.

PEN NOT WORKING? (troubleshooting?)

We are sorry that your vaporizer pen is not working properly, please watch our instructional video on how to resolve the issue yourself if your pen happens to be blinking red or white for any reason.

If you are still having trouble, please contact us at [email protected] so we can troubleshoot your vaporizer battery.

WARRANTY

O.penVAPE offers every customer a Friend for Life warranty that makes replacements hassle free. If you break your pen (hey. accidents happen, right?), or it starts malfunctioning, you have two options to get a new vaporizer replacement.

  1. Just pay one-way shipping to return the vaporizer pen to us and we will replace your O.penVAPE with a brand new pen, including a new charger.
  2. Or you can choose our expedited warranty, which costs $10 for a brand new pen ordered from our site and does include a charger and shipping. Once you have contacted us and your device has been deemed defective, we will issue you a coupon for your new pen to be bought online.

Please visit our warranty page for a return form and additional details on how to return and replace your product online or in store.

WHERE TO BUY You can purchase any O.penVAPE vaporizer battery on our website or from one of our licensed retailers. If you would like to purchase a cartridge for your O.penVAPE battery, please see our list of licensed retailers for a convenient location in one of 10 states where O.penVAPE is sold. HOW TO USE All o ]]>