Categories
BLOG

enail dab temp

UPDATED 2020: Finding the Perfect Temperature For Your E-Nail or Vape

It’s a little known fact among dab users that if you know how to control the temperature of your vape or e-nail properly, you waste a whole lot less of your concentrates and can taste a lot more of your cannabis terpenes.

The temperature of your e-nail or vaporizer should adjust based on a couple of factors, being how much vapor you want to consum, the type of cannabis concentrate, and what type of materials you are using to consume the concentrate.

In general, you want to have your e-nail or vaporizer set somewhere in the 500°F to 800°F range, but as this guide will show, there is plenty of room to find your own preference. The Bee-Nail v2 E-Nail is preset to 710°F to give users a nice starting point to dial in their preference.

Large Hit or Prolonged Flavor?

The main and most noticeable difference between higher and lower temperatures is the harshness and strength of the hit. This is the first factor to consider in getting the hit you are looking for, as it has the biggest effect on where you should set your vape or e-nail.

Higher temperature dabs, at around 600°F to 800°F, produce more vapor but may burn off certain terpenes, sacrificing some flavor.

Lower temperature dabs, at around 500°F to 600°F, do not produce as much vapor but these low temp dabs preserve terpene profile a little bit longer contributing to better flavor.

Remember high temp dabs equal more vapor but less flavor and low temp dabs give you less vapor but more flavor. Choose the right temperature that works best for you!

Different Dabs Need Different Heats

Various heats work better or worse for various concentrates. Generally, if the concentrate tends to be really viscous and it liquefies and pools in the bottom of your nail or atomizer, such as with shatter or distillates, it requires a higher heat to be able to fully vaporize without collecting and being hard to consume.

If you find that your concentrates are being incinerated or leaving behind un-smokable black residue consistently, as may happen with some dry cannabis concentrates like your waxes and crumbles at very high temperatures, you will want to turn it down.

The more viscous the concentrate, the more likely you will need a higher temperature to ensure that it has all been consumed. Below is a short list of suggestions for some different concentrate styles and what temperatures work best for them. Use this as a way to compare your concentrate to some of the more well-known varieties out there, and play around with the highs and lows of each section to figure out what works for you.

Low Heat (400°F to 500°F): Wax, Crumble
Mid Heat (500°F to 700°F): PHO, BHO
High Heat (700°F to 800°F): Shatter, Oil

Atomizer or Nail Material

Most vaporizers and e-nails are equipped with safe materials but not all vaporizers are safe. Safety is a top priority at Bee-Nails and that is why you will only find medical and food grade materials with the highest boiling points to avoid the potential of inhaling any toxic fumes. The three most trusted materials are titanium, quartz and ceramic.

The Bee-Nails GoBee Portable Vaporizer comes equipped with a dual quartz coiled atomizer in a ceramic chamber with titanium coils, including the three top rated vaporizer materials.

There are other good materials out there that other vaporizers may have like aluminum and stainless steel but with higher heat capabilities with an e-nail the three mentioned materials are most recommended.

As an example, the boiling point of aluminum is only 1220°F compared to the higher boiling points of quartz at 2192 °F, ceramic at 3000°F, and titanium at 3034 °F. Higher boiling points means less probability of toxic fumes in your lungs.

You also have to keep heat retention in mind because it’s not all about heat resistance. Glass nails have a very high melting point but they can easily break at very high temperatures and don’t retain heat very well.

Instead, opt for titanium, ceramic or quartz nails to go with your e-nail. Not only do they retain heat more effectively, but they can reach much higher temperatures without danger of damage.

Choose safe vaporizers. Be sure to check for suggested temperature specifications to make sure you are not going to fry any circuitry. Usually, vaporizers can handle all temperatures suggested in this list, but some models may only support specific wattage and therefore restrict your temperature options. Happy vaping!

This article highlights the key things to consider when finding the perfect temperature for your e-Nail or vape.

The Best Temps to Set Your E-Nail

by Titanium Mike September 01, 2015

As one of the first online retailers to start selling a variety of E-Nails, we’ve received a bunch of Emails from our customers asking what is the best temperature to dab your essential oils at. Quick Answer: There is no temperature that works perfectly for everything. There’s a lot of factors that come into play when picking a temp for your E-Nail. Here’s some questions to ask yourself:

  • What type of insert you’re using? – Titanium, Ceramic, or Quartz.
  • Consistency of essential oil? – Waxy, crumbly, oily, soild, etc.
  • How much essential oil are you’re using per hit?
  • How large is your rig?
  • Are you using a carb cap?

All of the answers will directly impact the temperature you should set your Enail at. The biggest impact on temperature setting is the use of a carb cap. Carb caps will all you to effectively vaporize your essential oil concentrates at a lower temp that will create for a less harsh/tastier hit. Without one, you’ll need to keep your E-Nail at a higher temp in order to vaporize all of your material.

Gotchya, okay. so what temp should I keep it at?

Personally, I use a carb cap and I like to heat my titanium insert at the lowest temperature as possible while still being able vaporize the entire hit without leaving any residue left behind that’ll be wasted by disapating into the air. My favorite temp that works for me: 660 degrees farinheit. If you feel like you can go a little lower in temp, go for it. If the essential oil is pooling in the bottom of your cup and not vaporizing, then that means you should turn up your temperature. How high? The highest temp that we’ve seen that people still use/like is 710. Is it because the number 710 is considered to be the new 420? Maybe. But there’s definitely a good amount of people who swear by 710 on their E-Nail and not because it’s 0IL.

Conclusion:

See what works best for you that suits your setup and preferences. Start at a temp aroudn 660 and either increase or decrease the temperature to get closer to the “sweet spot” that provides great flavor while still effectively vaporizing your essential oils without leaving anything left behind.

What temperature should you set your new E-nail at? Find out everything you need to know about finding the best temperature that works best for you. ]]>