Categories
BLOG

3d printable bong

3d print bong

Spider Bong for 3D printing. The bong is intended for the use of smoking mixtures. Consists of 5 STL files. STL files are optimized for 3D printing and checked for errors. It is possible to print on printers any available technology (FDM, SLA.

This stem adapter was modified for the slider to fit into it. . That way they can both be pulled out together, but still be separated for cleaning.

A 3D-Printable bong designed to resemble a bolt. The bong contains an ice pinch and has an 18mm grommet hole. .

It is fully working bong, the water tank is in the skull. Recommendet skale is cca.150-170% and infill cca 10%, wall thickness should be at least 1mm ( make sure it is water tight) also put a little higer hotend temperature for better adhesion. With.

Inside Out – Bing Bong

Bing Bong Color Model

Print the sections you want, assemble them in any order! designed for use with a tapered glass hitter and a glass stem insert. Be safe, don’t do anything stupid! .

Make sure you print it with at least 4 layers wall thickness to prevent leaks, but if you do have any leaks after printing I would recommend using a soldering iron to melt together any small leaks. I’ve used this bong countless times and its very.

It works exceptionally well.Make sure you print it with at least 4 layers wall thickness to prevent leaks, but if you do have any leaks after printing I would recommend using a soldering iron to melt together any small leaks. I’ve used this bong.

Many iterations on this design have got me to a bong that’s functional, easy to print, and hits smoothly. Here are the Specs: 14mm Downstem Base 8 armed percolater Internal Splash Guard Ice Catcher 10 Inches tall, or 247mm 6 Oz for optimal water.

Bong by Cappellini | 3d model produced by Design Connected | www.designconnected.com This 3d model is part of the highly acclaimed Design Connected collection featuring 6500+ carefully picked exclusive furnishings. Check out our full range of 3d.

BONG=========================- Modeled in Blender.- Preview image rendered using cycles.- All scene are included in .blend files.- Poly count are before sub division- Great for close up render.- All parts and materials are logically named.OTHER.

Bong Print Settings Printer Brand: RepRap Printer: WANHAO Duplicator i3 Notes: Печатать без поддержек

. with aluminium foil. 🙂 I’ve also included a KEY CHAIN bong – print it at 50% size! You can also print the normal bong at 50% – makes a cool pen / wacom stylus holder 🙂 Print settings: 0.2mm layer height 2 or 3 shells 30% infill Have fun! .

Thsi is a bong :v

Bong For ”Tobaco” only use ¯\_(ツ)_/¯

A Bong for this Head: https://amzn.to/2MklkRU

Print at 7 wall just for safety measures for water leaks

A model of a simple glass bong

Modern style simple syntethic bong with steel components and kickhole. BESTEBONG written on the front. .

Hello, today I present to you “Bing Bong” the tender character of the movie “inside out” that is made of cotton candy, it is the fourth design of the collection, before completing it with the 2 missing characters there will be new surprises, I hope.

Hello, today I present to you “Bing Bong” the tender character of the movie “inside out” that is made of cotton candy, it is the fourth design of the collection, before completing it with the 2 missing characters there will be new surprises, I hope.

. project at http://superdabbros.com I build the worlds smallest digital E-Nail. 😀 Instructions Print at 0.2mm layer height 98-100% infill Use of PLA or other semi food safe plastics are recomended You can use translucent filament for best results.

It’s just a bong. . #Chilluminati

Game ready glass bong made using high to low poly baking. . -Dimensions Bong Height: 30cm Texture size: 2048 x 2048 -Files Included FBX File OBJ File PBR Textures Unity 5 Textures Unreal 4 Textures

3d print bong ✅. Spider Bong for 3D printing. The bong is intended for the use of smoking mixtures. Consists of 5 STL files. STL files are optimized for 3D printing and checked for errors. It is possible to print on printers any available technology (FDM, SLA,……

The rise of 3D printed bongs

Even though 3D printing technology has been around since the early 1980s, it wasn’t until the past few years that news about its potential caught the attention of the mainstream consumer. Though the technology still comprises a small corner of the manufacturing sector, 3D printing analyst firm Wohlers Associates estimated that the industry grew by 31% annually from 2014-2020.

Traditional manufacturers are taking a second look at 3D printing for several reasons: faster production, cost-effectiveness and less waste among them. 3D printing is also a much more nimble technology than conventional manufacturing. Recently, several 3D printing companies pivoted their bottom line to help COVID-19 efforts, developing 3D printed oxygen valves and hands-free door handle attachments.

Though 3D printing has yet to make a splash in the cannabis industry, one company in Seattle, Washington, is embracing the technology. Brothers Al and Saul Jacobs, both of whom have backgrounds in the fine arts (Saul is a glass artist), started their business PrintABowl to create customizable pipes and bongs.

Printing quality smoking accessories

While the products themselves are not 3D printed, the ceramic molds made to shape them are. However, if you are up to spending about $200-$700, with a little creativity and some open-source searching, you could print your own bongs or pipes at home.

In fact, spending a bit more money to buy that 3D printer — or at the very least buy glass products made in America or Canada — is a good move to support the legal cannabis industry. As access to legal cannabis in the U.S. has increased, local markets have been flooded with cheap glass from countries with low-quality control standards, like India and China.

Glass operations in China, for example, often bypass labor and safety standards, making the product much more likely to break, crack or change color. In the short term, you probably paid less for your glass. But in the long run, it is much more likely to break.

How to print your own bong

Luckily, there are plenty of places to find open-source, free designs to 3D print your own bongs at home. You can check out sites like YouMagine, Shapeways, Thingiverse and 3DWarehouse for ideas.

With a 3D printer at home, you can get creative making bongs with other people’s designs, and maybe even come up with a few designs of your own. You can also use the printer to make other cool stuff, from cable organizers to salt and pepper shakers.

Featured image by Gina Coleman/Weedmaps

Traditional manufacturers are taking a second look at 3D printing for several reasons: faster production, cost-effectiveness and less waste among them. ]]>